(as of Nov 16,2020 17:41:36 UTC – Details)
Item name: Eachine E010 Mini Quadcopter Quadcopter
Box Size: 14X8.6X11CM
Gyro: 6-axis Frequency: 2.4G Channel:4CH Battery: 3.7V (150MAH) (included)
Flight time: about 5 minutes
Charging time: 30 ~ 50 minutes
Flying distance: 30 meters
Commen Problem and The Solution:
Drone lost connection to controller: Pull two lever to bottom left for 3 seconds, then pull two function lever to bottom right for 3 second. Then mach code again(Follow Bullet points 4 );
Drone can’t lift up: Check the propeller to make sure it was installed correctly(diagonal propellers must be the same direction );
Motor not spin: Check the motor to see if anything stuck in motor
Hight / Low Speed Switch
Easy & Fun
With built-in positioning system, the drone can auto locate the remote control, just press the one key return button, the drone will fly back to the remote control’s location.
The simple flying of WSAD is too boring, and the new 3D rolling makes it possible for excellent performance of flips and rolls by simple push of the button.
The drone will change its flight direction with the change of the direction of remote control which brings much more confidence for the beginners.
1x USB charging cable
How to Charge:
1.Plug the USB Charging Cable into a USB charging port of PC/ Power Bank/ Phone Adapter;
2.Connect the battery to charging cable;
Charging time: 40-60 minutes
Red indicator light on USB charging cable keeps on under charging and turns off when fully charged.
Low price and Practical：Low price and Durability is the best choice for beginners, as well as a good gift for people.
3D flip and High low speed mode：The drone can perform 3D rollover performance, free to switch between high and low speed modes, have more fun.
One-key return: The drone can auto locate the remote control, just press the one key return button, the drone will fly back to the remote control’s location.
Compass Mode: The drone will change its flight direction with the change of the direction of remote control.
Steps to Match Code: 1. Turn on the quadcopter then turn on the controller; 2. Push the throttle(left lever) to the top , and then pull it down; 3. When you hear a “Beep”, which means the connection was set up successfully, and then you can start to fly your drone.